Semi-universeel sintrum (Dividing Head
* Funksje
1.De snelle feroaring tool post is in wichtige spare dielen fan 'e gewoane draaibanken.
2.It is gearstald út it cutter-cartridge lichem en de tool-holder foar ferskate cutting ark foar ferwurkjen wurken lykas silindryske facing, ein facing, cutting, knurling, boarjen, fergrutting saai en reaming, ensfh
3.De hichte fan ark kin regele wurde en pleatst relatyf oan 'e middenline fan masinespindle.
4.It hat eksterne tool-mounting, tool-matching, quick tool-feroaring, grutte presyzje yn posysjonearring en grutte hurdens ensfh.
* 5-stik sets (1 arkpost, 3 arkhâlders fan platte seksje, 1 arkhâlder mei V-sit foar rûne gatten)
| Artikelnr. | Model | elk set omfiemet | NW(kgs) |
| 560-200 | M | 1 Stk 501-M, 3 Stk 502-M en 1 Stk 503-M | 2.89 |
| 560-300 | AR-AP | 1 Stk 501-AR-AP, 3 Stk 502-AR-AP en 1 Stk 503-AR-AP | 4.29 |
| 560-400 | A | 1 Stk 501-A.3 Stk 502-A en 1 Stk 503-A | 8.9 |
| 560-500 | BR-BP | 1 Stk 501-BR-BP.3 Stk 502-BR-BP en 503-BR-BP | 12.89 |
| 560-600 | B | 1 stikken 501-B.3 Stk 502-B en 1 Stk 503-B | 17.26 |
| 560-700 | C | 1 Stk 501-C, 3 Stk 502-C en 1 Stk 503-C | 22.55 |
| 560-800 | D | 1 stks 501-D, 3 stks 502-D en 1 stks 503-D | 44.75 |
| Model | draaibank swing | I | AH7 | H | L | R | T max | z | Φmax | Morse nr. | ΦD | M | H1 | |
| Min | Max | |||||||||||||
| M | 180-250 | 57.7 | 18 | 24 | 34 | 45 | 8 | 16 | 56 | 14 | 1 | 7 | 27 | 18 |
| AR-AP | 250-300 | 64,5 | 18 | 25 | 41 | 56 | 9 | 16 | 63 | 16 | 1 | 8 | 30 | 16 |
| A | 250-350 | 82 | 24 | 32 | 42 | 60 | 12 | 20 | 75 | 18 | 2 | 10 | 35 | 20 |
| BR-BP | 300-380 | 91.6 | 28 | 38 | 53 | 75 | 13 | 25 | 90 | 20 | 3 | 10 | 40 | 20 |
| B | 350-500 | 100,0 | 30 | 47 | 65 | 85 | 15 | 32 | 100 | 24 | 3 | 12 | 48.2 | 25 |
| C | 500-650 | 115.3 | 38 | 51 | 72 | 94 | 19 | 32 | 108 | 26 | 4 | 14 | 58.2 | 26 |
| D | 650-1200 | 133 | 42 | 61 | 95 | 120 | 21 | 40 | 139 | 35 | 5 | 14 | 65 | 40 |
* Quick Change Tool Post
| Artikelnr. | Sintrum hichte (mm) |
| 501-M | 120 |
| 501-AR-AP | 140 |
| 501-A | 170 |
| 501-BR-BP | 200 |
| 501-B | 230 |
| 501-C | 280 |
| 501-D | 350 |
* Tool Holder Tool Bits
* Tool Holder Tool Bits
| Artikelnr. | Maksimum fjouwerkante en rjochthoekige ark T(mm) |
| 502-M | 16 |
| 502-AR-AP | 16 |
| 502-A | 20 |
| 502-BR-BP | 25 |
| 502-B | 32 |
| 502-C | 32 |
| 502-D | 40 |
* Tool Holder foar Round Shanks
| Artikelnr. | Max Holding Dia (mm) |
| 503-M | 14 |
| 503-AR-AP | 16 |
| 503-A | 18 |
| 503-BR-BP | 20 |
| 503-B | 24 |
| 503-C | 26 |
| 503-D | 35 |
* Power Feed
| Artikelnr. | Taper Hole |
| 504-M | 1MT |
| 504-AR-AP | 1MT |
| 504-A | 2MT |
| 504-BR-BP | 3MT |
| 504-B | 3MT |
| 504-C | 4MT |
| 504-D | 5MT |
